loading spinner

SALIDA mA o VDC Hay 5 productos.

Mostrando 1 - 5 de 5 items
  • Z102 accepts signal from rheostat (2 wires) or potentiometer (3 wires) and converts/isolates it into mA/V standard signals. The auxiliary power supply allows also an active or passive connections on the output side. 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.

  • Z104 allows a conversion of the current or voltage input signal into a series of pulses with constant duration. A typical use is when, with a flow meter featuring an analogue output (example 4-20mA), the flow must be totalized. The output is programmable in a range from 1 pulse every 2 hours to 10 KHz. A 3-way galvanic isolation among Power supply //...

  • Z107 allows a transparent conversion and isolation of RS485/RS422 serial line into RS232 and viceversa. The RS232 connection is available both on terminals and RJ10 connector. As well the RS485 connection is available both on terminals and back side connector.

  • Z109PT2-1 is a converter for Thermoresistance RTD (PT100, PT1000, PT500, Nì100) with 2,3,4 wires and provides a mA/V standard output signal. Its completely configurable through dip switches and software. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas.

  • Z109REG is an universal converter for analog input: voltage, current, thermocouples, PT100, potentiometer. Z109REG assures sensor powered by 2-wire technique: 20Vcc stabilised, 20mA max with short-circuit protection. The module guarantee measurement and re-transmission on isolated analog output, with voltage and current output. Type of input, zero and...

Mostrando 1 - 5 de 5 items